Showing posts with label Past Paper. Show all posts
Showing posts with label Past Paper. Show all posts

Sunday, 29 July 2012

CS609 Unsolved MCQs from Quiz 3 #2


Size of FS Info block is _______.
Select correct option:
64 bytes
128 bytes not sure
256 bytes
512 bytes

When we mark a file as deleted by placing 0xE5 then the chain of clusters in FAT is also
replaced by ______.
Select correct option:
E5
1
0
N
Cluster size is reduced in __________.
Select correct option:
FAT12
FAT16
FAT32
None of the given
Maximum possible entries in FAT12 are ________.
Select correct option:
1024
2048
4096
65536

Disadvantage of FAT32 is ________.
Select correct option:
Large disk size can be managed in FAT32
Cluster size is reduced
Internal fragmentation is reduced
Very large table

In FAT32 __________ root directory entries are there.
Select correct option:
128
256
512
None of the given

If a file is having more than one cluster then it will be managed by ______.
Select correct option:
FAT
BPB
DPB
None of the above

Internal fragmentation is reduced in _______________.
Select correct option:
FAT12
FAT16
FAT32

None of the given
For supporting long file names, _________ fragments can be supported.
Select correct option:
12
20
26
32

To store a cluster in FAT 32 _____ is/are needed.
Select correct option:
Nibble
Byte
2 Bytes
4 Bytes

If a file size is 12K and the size of the cluster is 4K then _____ clusters are used for the
file.
Select correct option:
2
3
4
5

We can access the contents of File by using the root directory entry and _____.
Select correct option:
Reserved Blocks
Number of FAT copies
File Allocation Table (FAT)
None of the given

FAT based file system can store file name in ________ form.
Select correct option:
ASCII
UNICODE
Both ASCII and UNICODE
None of the given

CS609 System Programming Final Subjective Questions 2012


CS609  System Programming Final Subjective Questions 2012



Write down the two main features of FAT12? (2 marks) 

How many bytes are used for FCB in FAT12 & FAT16 and to store a cluster in FAT32 how many bytes are required? (2 marks) 

What is paging in context of non contiguous memory management system? (2 marks) 

What does it indicate if the value of first byte of data part of partition table is 00H? (2 marks) 

Write down the formula to translate the cluster # into LSN for FAT 32 file system. (3 marks) 

What are selectors and why we use them? (3 marks) 

Is LSN=0 and LBA=0 same thing? Why or why not? 3marks 

Which data structure is derived from BPB and where it resides? (3 marks) 

In interval timer, what is the purpose of using the following ports?43H, 40H, 41H, 42H  (3 marks) 

Describe how a chain of cluster in FAT12 is managed.  (5 marks) 

How LSN is translated to LBA in NTFS based system?   (5 marks)  

How a PC operate in real mode?    (5 marks)

CS610 FINAL SPRING 2010 SHARED BY MISS SHINNING STAR


FINALTERM  EXAMINATION
Spring 2010
CS610- Computer Network
Time: 90 min
M a r k s: 60






Question No: 1      ( M a r k s: 1 )  

A ---------- relies on the hardware manufacturer to assign a unique physical address to each network interface.



       ► Static addressing scheme

       ► Configurable addressing scheme


       ► Dynamic addressing scheme

       ► None of the given


Question No: 2      ( M a r k s: 1 ) 
 

An interface for thin  Ethernet must have an ____________  connector , and must generate signals according to the_____________ specification.

       ► RJ-45, 10 Base T

       ► RJ-45, 10 Base 5


       ► BNC, 10 Base 2


       ► BNC, 10 Base T


Question No: 3      ( M a r k s: 1 ) h
 

A system with redundant bridges might have a problem with_______ in the system.


       ► Loop

       ► Filters

       ► Spanning Trees

       ► All given choices


Question No: 4      ( M a r k s: 1 )
 

A Bridge can ________


       ► Filter a frame

       ► Forward a frame

       ► Extend a LAN

       ► Do all the above


Question No: 5      ( M a r k s: 1 ) 
 

________ is used for typical data applications (where the data rate may be unknown and bursty) and allows use of whatever bandwidth is available at a given time.

       ► Constant Bit Rate (CBR) service

       ► Variable Bit Rate (VBR) service

       ► Available Bit Rate (ABR) service

       ► None of the given


Question No: 6      ( M a r k s: 1  

ATM assigns each VC a _____________ identifier that is divided two parts to produce a hierarchy.

       ► 21-bit

       ► 22-bit

       ► 23-bit

       ► 24-bit


Question No: 7      ( M a r k s: 1 ) \
 

________ of TCP/IP layering model, corresponds to basic network hardware.


       ► Physical Layer

       ► Network Interface Layer

       ► Internet Layer

       ► Transport Layer



Question No: 8      ( M a r k s: 1 ) \ 

___________ places the boundary between the second and third octets

       ► Class A

       ► Class B

       ► Class C

       ► Class D


Question No: 9      ( M a r k s: 1 )  

UDP and TCP are both_________ layer protocols


       ► Physical

       ► Data link

       ► Network


       ► Transport


Question No: 10      ( M a r k s: 1 ) 
 

Connection-oriented service, Point-to-point, Complete reliability, Full-duplex communication, Stream interface, Reliable connection startup and Graceful connection shutdown are the services provided by__________

       ► IP

       ► None of the given

       ► TCP

       ► UDP


Question No: 11      ( M a r k s: 1 ) 
 

_______ protocols of TCP/IP layering model specify how to ensure reliable transfer.

       ► Physical Layer

       ► Network Interface Layer

       ► Internet Layer

       ► Transport Layer



Question No: 12      ( M a r k s: 1 )
 

________identifies which application program on receiving computer should receive the data

       ► Logical address
Source port
Logical address
None of the given


       ► Source port

       ► Destination Port

       ► None of the given


Question No: 13      ( M a r k s: 1 ) \ 

________ identifies the application program that sent the data.

       ►  Destination Port


       ► Source port

       ► Logical address

       ► None of the given


Question No: 14      ( M a r k s: 1 ) h 

Which of the following are interior routing protocols?


       ► RIP

       ► OSPF

       ► BGP

       ► RIP and OSPF



Question No: 15      ( M a r k s: 1 ) tThe Border Gateway Protocol (BGP) uses_________ for all communication


       ► UDP

       ► TCP

       ► Both UDP and TCP


       ► None of the given


Question No: 16      ( M a r k s: 1 ) 
 

__________measures distance in network hops, where each network between the source and destination counts as single hop.

       ► BGP

       ► OSPF

       ► RIP

       ► None of the given



Question No: 17      ( M a r k s: 1 
 

OSPF is based on--------


       ► Distance vector routing

       ► Link state routing

       ► Path vector routing

       ► Distance vector routing and Link state routing



Question No: 18      ( M a r k s: 1 ) 
 

_________ performs local multicast and uses IP-in-IP encapsulation to send multicast datagrams from one site on the Internet to another.

       ► Distance Vector Multicast Routing Protocol (DVMRP)

       ► Core Based Trees (CBT)


       ► Protocol Independent Multicast_ Sparse Mode (PIM-SM)

       ► Protocol Independent Multicast _ Dense Mode (PIM-DM)



Question No: 19      ( M a r k s: 1 )  

The length of time required to send a variable length packet is variable and does not require a complicated interrupt scheme to detect completion of transmission.

       ► True

       ► False


Question No: 20      ( M a r k s: 1 ) 
 

NEXT HEADER field in the base header defines type of header and it appears at end of fixed-size base header.

       ► True

       ► False


Question No: 21      ( M a r k s: 1 ) \
 

Although message exchange can be used to bind addresses, sending a request for each binding is hopelessly inefficient.

       ► True

       ► False


Question No: 22      ( M a r k s: 1 ) 
 

Address mask defines how many bits of address are in suffix?

       ► True

       ► False


Question No: 23      ( M a r k s: 1 )  

A computer attached to a given network can only communicate with other computers attached to the same network. Is this a problem with multiple networks?


       ► True

       ► False


Question No: 24      ( M a r k s: 1 ) h\\\
 

In the 1970s large organizations began to acquire multiple networks. Each network in the organization formed island. Employees needed to choose a computer appropriate for each task. So they needed multiple screens, keyboards and computers.


       ► False

       ► True

\
Question No: 25      ( M a r k s: 1 ) h\
 

The term self-identifying is used for Classful IP addresses because the class of the address can be computed from the address__________.  

       ► itself

       ► prefix

       ► suffix

       ► mask


Question No: 26      ( M a r k s: 1 )\ 

In which method of Address Resolution Protocol the protocol address independent of hardware address?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data Exchange?

       ► T, C

       ► D

       ► C

       ► T, D


Question No: 27      ( M a r k s: 1 ) 

In which method of Address Resolution Protocol the protocol address is determined by hardware address?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data Exchange?

       ► T

       ► D

       ► C

       ► T, C


Question No: 28      ( M a r k s: 1 ) h
 

Reconstruction of original datagram is called reassembly.

       ► True

       ► False


Question No: 29      ( M a r k s: 1 )
 

A computer needs a complete stack of protocols to run either a client or a server.

       ► True

       ► False


Question No: 30      ( M a r k s: 1 ) 
 

TCP uses _______ mechanism to control the flow of data.

       ► door

       ► window

       ► acknowledgment

       ► retransmission


Question No: 31      ( M a r k s: 2 )
 

To solve the problem the routers and networks in the Internet are divided into groups. How large do you think are these groups?



Question No: 32      ( M a r k s: 2 )
 

Traceroute continues to increment the Time To Live until the value is large enough for the datagram to reach its final destination. What happens when the TTL is sufficiently large for the datagram to reach its destination?




Question No: 33      ( M a r k s: 2 )
 

How can TCP monitor internet delays?


Question No: 34      ( M a r k s: 2 )
 

Which wireless standard is used in WIFI technology?



Question No: 35      ( M a r k s: 3 )
 

How does IP software reassemble fragments that arrive out of order?



Question No: 36      ( M a r k s: 3 )
 

What kind of information is in a routing table?



Question No: 37      ( M a r k s: 3 )
 

Define frames without type field?



Question No: 38      ( M a r k s: 3 )
 

What is the meaning of Facilities For Transit Routing as a characteristic of the Border Gateway Protocol?


Question No: 39      ( M a r k s: 5 )
 

What are the charachteristics of the Border Gateway Protocol?


Question No: 40      ( M a r k s: 5 )
 

Describe how NAT can be usefull for residence with cable modem or DSL?